2020 Camso R4S Base

Information

2020 Camso R4S

Get greater access for less

An all-season ATV track system designed for small machines. Whatever your way to play — ice fishing, hunting, farming, getting to the cabin — the ATV R4S is the perfect track system to take your ATV further than ever before, for less.

Features may include:

Track Design8” track width
  • Specially adapted for small cc ATVs
  • Ground pressure reduced by 50% vs. tires
FrameLightweight powder coated steel frame
  • Optimized geometry
  • Overall good performance and handling
Sprokets & WheelsSprockets
  • Adapted for smaller-bore ATVs
  • Adjusted to prevent clutch and engine overload
Centered rubberized double-bearing idler wheels
  • High impact resistance
  • Prevent ice accumulation during winter use
Rubberized and sealed mid-rollers
  • Increased wheel bearing longevity
  • Prevent ice accumulation during winter use

Photos

Highlights

  • Longville, Minnesota
  • 2020
  • Camso
  • R4S Base
  • Available
  • System Offset: 5.5 in (140 mm) | System: 8.4 in (213 mm) | Rubber Track Front: 8 in (203 mm) | Rubber Track Rear: 8 in (203 mm)
  • System Front: 24 in (610 mm) | System Rear: 24 in (610 mm) | Rubber Track Front: 7/8 in (22 mm) | Rubber Track Rear: 1 in (25 mm)

Specifications

  • 2020
  • Camso
  • R4S
  • Base
  • General
  • Type: Internal drive
  • 15 to 18 teeth
  • Carbon steel
  • Idler & mid-roller: Tire 134 mm double bearing & sealed mid-roller wheels. Bladder-type wheel cap. 200 mm double bearing
  • bearing: Oiled 2 bearing with cast steel multi-bolt (4-5) pattern hub.
  • Ground surface: 1 333 sq. in (0.86 m²) |Maintained speed: 2/3 | Rubber Track Front: Flat | Rubber Track Rear: Flat
  • Increased by 3 1/4 in (83 mm)
  • System Offst Front: 25 in (638 mm) | System Offset Rear: 26 in (658 mm) | System Front: 40 in (1016 mm) | System Rear: 43 in (1092 mm) | Rubber Track Front: 93.4 in (2372 mm) | Rubber Track Rear: 98.6 in (2504 mm)
  • System Front: 24 in (610 mm) | System Rear: 24 in (610 mm) | Rubber Track Front: 7/8 in (22 mm) | Rubber Track Rear: 1 in (25 mm)
  • System Offset: 5.5 in (140 mm) | System: 8.4 in (213 mm) | Rubber Track Front: 8 in (203 mm) | Rubber Track Rear: 8 in (203 mm)
  • System: 60 lb (27 kg) | Mounting hardware: Approx. 6.25 lb (2.75 kg)
  • Guide: Molded UHMW | Anti-rotation: Redesigned mild steel anti-rotation single rate spring and progressive damper. Quick connect steering limiter design.